30 x Leak Stop (supplied with no adapters) - EXTREME ULTRA - Cartridge 6 ml - Package # 30 pcs
Chemical Products
Equipment
Lubricants
Secondary fluids - GLYCOLS GK Lab?
Solvents and flushing fluids for Refrigeration & Air Conditioning piping GK Lab?
Leak detectors & Dye - GK Lab? for Refrigeration, Air Conditioning Auto A/C
Gas Leak Stop for Refrigerant Leakages GK Lab?
Additives for PH Value, Moisture, Deposits of Oil and Refrigerant Gas Leak - GK Lab?
Disinfectants and sanitizers with Bactericide and Virucidal Efficacy - Medical Devices
Auto - DPF Cleaning - Diesel Particulate Filters
Leak Stopper for Vehicles Cooling System
Chemical Products
HVACR tools - Flaring tools and flare lubricant
HVACR tools - Tube cutters and deburrers
Electronic Leak Detectors (infrared and heated diode), foaming detectors
Recovery Units for A1, A2L and A3 refrigerants (R290 propane)
Nitrogen and Nitrogen/Hydrogen Pressure Kit + Testers for Refrigeration and A/C systems
High vacuum pumps and hoses for HVACR systems
Digital Manifold Gauges, vacuum meters and bluetooth probes for pressure, temperature, humidity
Refrigerant digital weighing scales
Electronic Instrumentation for Diagnosis of Refrigeration & A/C systems
HVACR tool backpacks (original Fieldpiece)
Charging and recovery hoses for refrigerants
Refrigeration oil charging pump for HVACR systems
Washing and cleaning units for Refrigeration & Air Conditioning systems
Adapters, connectors, depressors, shut-off, filters, valves GK Tools?
Sensors and control units for detecting leaks of refrigerant gases in the environment
T-PED Refrigerant cylinders (refillable)
Quick Couplers and Adapters - Automotive
N2, O2, C2H2 high pressure cylinders
G-TEC small cylinders (argon, CO2, blend Ar/CO2) and pressure gauges
Calibration and Check Service for F-Gas Instruments and Tools
Equipment
Welcome Back!
Cart
Total
$ 0.00
Leak Stop for Plastic Components - EXTERNAL P - Package # 1 pc.
Do you need to buy large quantities?
External Leak Stop for Plastic Components for leaks up to 5 mm.
EXTERNAL P is a Leak Stop that attaches to all types of plastics effectively sealing all types of leaks up to 5 mm.
Specifically designed to be inert and to resist if in contact with all thermal solutions, EXTERNAL P has a good elasticity and therefore adapts to the expansion of the pipe.
It resists normal flushing liquids and temperatures between -10°C to +270°C. The pressure resistance depends on the size of the leak.
Two fingers are enough to melt the two components of EXTERNAL P. The leakage will be closed in a few movements.
EXTERNAL P is ideal in case of emergency operations, in order to quickly restore a system. It also does not disperse residues in the system and can be easily removed to go on with a subsequent different type of intervention.
Once dry, EXTERNAL P can be sanded and finished.
EXTERNAL P can be also combined with the action of BLUET: first fix the greater leak from the outside and then complete the sealing operation from the inside. The two products are not only compatible, but also synergistic.
Instructions:
- find the leak by using the usual detection methods
- once the leak is identified, turn off the system, clean the application area with THOR to ensure a better grip
- cut with a cutter or a knife a quantity of EXTERNAL P which is enough to create a ring all around the entire diameter of the pipe in the area of the leak
- wear protective gloves and mix the two components for a while. The color must be uniform and you should perceive a slight sensation of heat
- pull the mixture well on the leak, let it adhere well to the whole circumference
- wait 24 hours for a perfect drying. In case you need to speed up the drying time, use a hairdryer or other heat source (N.B. non-direct flame).
- once the product is dried, let the system run normally again
- if you need to remove the product, spray THOR on it, wait a moment, grab the ring with pliers or spanner with a little pressure that does not deform the pipe and rotated in one direction.
For professional use.
| EAN | 8033158034933 |
| Package weight | 0.1 Kg. |
| Product Type | Ready |
| Implementing rules: | Ready to use |
| Suitable For: | Internal conditioners split units |
| External Split Unit Air Conditioners | |
| Fan coil air conditioning | |
| Capacitors conditioning chillers | |
| Refrigeration - Evaporators | |
| Refrigeration - Condensers | |
| A/C and Refrigeration Units | |
| Item number | F-ER-PC-TUR-06-1 |
| Packaging | Cardboard box |
| Data sheet | Signup or Signin for Download |
| Material Safety Data Sheet | Signup or Signin for Download |
Our products
Recommended for you
30 x Leak Stop for RAC System + adapters 1/4 SAE and 5/16 SAE + Flexible Adapter - EXTREME ULTRA - Cartridge 6 ml - Package # 30 pcs
30 x Leak Stopper for Refrigeration Systems with R290 and R600a (no adapters) - EXTREME WHITE ULTRA - cartridge 6 ml - Package # 30 pcs
30 x Leak Stopper for Refrigeration Systems with R290 and R600a + 1/4 SAE adapter + flexible adapter included - EXTREME WHITE ULTRA - 6 ml - Package # 30 pcs.
60 x Leak Stop for Metal and Rubber Components - EXTERNAL - Package # 60 pcs
60 x Leak Stop for Plastic Components - EXTERNAL P - Package # 60 pcs
30 x FixQuik - Ultra-fast UV Fluorescent Leak Stop - Package with 30 pcs
Leak Stop for RAC System + adapters 1/4 SAE and 5/16 SAE + Flexible Adapter - EXTREME ULTRA - Cartridge 6 ml - Package # 1 pc.
Leak Stop (supplied with no adapters) - EXTREME ULTRA - Cartridge 6 ml - Package # 1 pc.
Leak Stopper for Refrigeration Systems with R290 and R600a + 1/4 SAE adapter + flexible adapter included - EXTREME WHITE ULTRA - 6 ml - Package # 1 pc.
Leak Stop for Metal and Rubber Components - EXTERNAL - Package # 1 pc.
FixQuik - Ultra-fast UV Fluorescent Leak Stop - Package 1 kit with 2 bottles