SAMON GS230-HFC: detection unit with built-in sensor, for synthetic refrigerants A1 and A2L (HFC including R32 and HFO) - unit with relay output and semiconductor sensor (SC)
Chemical Products
Equipment
Lubricants
Secondary fluids - GLYCOLS GK Lab?
Solvents and flushing fluids for Refrigeration & Air Conditioning piping GK Lab?
Leak detectors & Dye - GK Lab? for Refrigeration, Air Conditioning Auto A/C
Gas Leak Stop for Refrigerant Leakages GK Lab?
Additives for PH Value, Moisture, Deposits of Oil and Refrigerant Gas Leak - GK Lab?
Disinfectants and sanitizers with Bactericide and Virucidal Efficacy - Medical Devices
Auto - DPF Cleaning - Diesel Particulate Filters
Leak Stopper for Vehicles Cooling System
Chemical Products
HVACR tools - Flaring tools and flare lubricant
HVACR tools - Tube cutters and deburrers
Electronic Leak Detectors (infrared and heated diode), foaming detectors
Recovery Units for A1, A2L and A3 refrigerants (R290 propane)
Nitrogen and Nitrogen/Hydrogen Pressure Kit + Testers for Refrigeration and A/C systems
Digital Manifold Gauges, vacuum meters and bluetooth probes for pressure, temperature, humidity
Refrigerant digital weighing scales
Electronic Instrumentation for Diagnosis of Refrigeration & A/C systems
HVACR tool backpacks (original Fieldpiece)
Charging and recovery hoses for refrigerants
Refrigeration oil charging pump for HVACR systems
Washing and cleaning units for Refrigeration & Air Conditioning systems
Adapters, connectors, depressors, shut-off, filters, valves GK Tools?
Sensors and control units for detecting leaks of refrigerant gases in the environment
T-PED Refrigerant cylinders (refillable)
Quick Couplers and Adapters - Automotive
N2, O2, C2H2 high pressure cylinders
G-TEC small cylinders (argon, CO2, blend Ar/CO2) and pressure gauges
Floor supports for R&AC outdoor units
Calibration and Check Service for F-Gas Instruments and Tools
Equipment
Welcome Back!
Cart
Total
$ 0.00
SAMON MPU4C: MPU control unit - 4-channel multi-zone control unit with light + acoustic alarm (for HFC, HFO and CO2) - unit with relay output, connectable to external sensors (supplied separately)
Do you need to buy large quantities?
MPU – 4-channel Multizone Control Panel
SAMON code: 20-300
The MPU4C unit is a four-channel control unit (sensors)
It is the ideal solution for monitoring small / medium-sized areas where there may be the presence of toxic or explosive gases
The microprocessor electronics of the unit independently provide for each channel, through multicolor LEDs, the status of each measuring point
Suitable for the detection of HCFCs, HFCs, CO2, ammonia, hydrocarbons such as: gasoline vapors, ethanol, hydrogen, natural gas, propane and butane etc.
Functions for each channel: the sensors connected to it continuously detect the presence of gas and provide an analog signal to the control panel
Three alarm levels: one yellow (early warning) and two red (medium and high) are associated with relay outputs for remote signaling
If the LED flashes it means that the system has detected a leak, if the signal persists even after the set delay time, the light becomes fixed and the contact is activated. Features:
Microprocessor electronic unit for four channels
Status indication LED for each channel
Three independently settable alarms for each channel
Alarm delay time (4 levels) can be set
Relay output A, B, C and malfunction, 230V / 5A
Manual or automatic alarm reset
Terminals for diagnosis
"Service" function for temporary blocking of alarms
Integrated self-diagnosis
Integrated buzzer
Built-in "Fail-safe" and "Power failure alarm" function
24V dc / 150mA output for siren or lamp
Ambient temperature 0°C - 50°C
Humidity 10-95% Rh (non-condensing)
IP66 protection
Matchable sensors:
Sensors are available for various gases and measuring ranges
MP sensors specific for MPU
Transmitters with output 0 10 V or 4 20 mA
Atex certified sensors for hazardous areas
NOTE: it is allowed to connect to the MPU sensors that have a total consumption of max 10 W; excessive load can damage the control unit.
| EAN | n.d. |
| Package weight | 3 Kg. |
| Item number | F-AF-SC-SAM-MPU4C |
| Packaging | Cardboard box |
| Data sheet | Signup or Signin for Download |
| Instruction manual | Signup or Signin for Download |
Our products
Recommended for you
SAMON GSR230-HFC: detection unit with remote sensor, for synthetic refrigerants A1 and A2L (HFC including R32 and HFO) - unit with relay output and semiconductor sensor (SC)
SAMON GXR230-HFC: ATEX detection unit with remote sensor, for synthetic refrigerants A2L (HFO and HFC included R32) - unit with relay output and semiconductor sensor (SC)
SAMON GXR230-HC: ATEX detection unit with remote sensor, for propane R290 and HC - unit with relay output and semiconductor sensor (SC)
SAMON GSLS230-CO2-10000: detection unit with built-in sensor and light + acoustic alarm, for carbon dioxide CO2 (R744) - unit with relay output and IR sensor (NDIR)
SAMON MP-DS (HFC/HFO/R32) – Detector for synthetic refrigerants for connection to MPU control panel - semiconductor sensor (SC)
SAMON MPS (CO2) – Carbon dioxide CO2 detector (R744) for connection to MPU control panel - IR sensor (NDIR)
SAMON GEX (R290 and HC) – Detector for R290 and hydrocarbons, for connection to MPU power plant - semiconductor sensor (SC)